Quickly loosens hard–to–turn screws, bolts, or nuts. Heavy–duty spring for added torque and extra body length for added safety. Overall length: 5–1/8" (130.2mm).

Provide maximum torque without spreading. Mac Drive spline produces an additional 20% more torque. Wrap-around head prevents distortion of soft metal flare nuts. Contains: 9 x 11mm, 10 x 12mm, 13 x 14mm, 15 x 17mm, 16 x 18mm, and 19 x 21mm.

400% more contact area. Offers more torque and less damage to fasteners. Prevents wrench from slipping at higher torque levels.

The Chrome, 10 pc Deep, Metric Socket Set Contains: 5mm, 6mm–14mm.

Chrome, Metric Universal Socket Set Contains sizes: 10mm–15mm.

1/2" drive impact set. Set contains:

Chrome, 3/8" Dr. 6" Extension.

The Chrome, 7 pc Socket Set Contains: 1/4", 5/16"-9/16".

Chrome, Standard Socket

Heavy–duty coil cord extends to 12'. Clear molded handle with stainless steel probe. Permanently attached wire with Heco® bushing and spring strain relief in specially hardened molded screw-on end cap for easy bulb or battery replacement. 18-gauge clip with insulating protective boot. 6-12 Volt Heavy-Duty Circuit Tester.

Standard Combination Wrenches offer more torque and less damage to fasteners and prevent the wrench from slipping with the KS2, Knuckle Saver System.

The Chrome, 8 pc Socket Set Contains: 1/4"-9/16".

Blade size: 1/2" (12.7mm) width, 4" (101.6mm) overall length—1" (25.4mm) 45° bend. Blade thickness: .005-.030.

Chrome, Metric Extra Deep Impact Sockets Set Contains sizes: 3/8"-3/4".

± 2% accuracy clockwise from 20% to 100% of full scale. Extra–large dial scale for excellent readability. Moveable scale always faces user. Memory needle indicates peak torque setting. Metal dial guard for added protection.

Clean four different battery connections with one tool: top post, group 31 truck, bi-level marine, side terminal. Saves storage space, time, and cost.

400% more contact area. Offers more torque and less damage to fasteners. Prevents wrench from slipping at higher torque levels.

Designed for soft steel where double flaring is necessary. Also designed to single flare copper, aluminum and brass to 45 degree. Contains five threaded dies 3/16" through 1/2" (4.8mm through 12.7mm). Chrome swivel, made of alloy steel, reduces friction. Yoke compressor made of heat-treated steel. Housed in heavy-duty storage box.

The Metric Deep Socket Set Contains sizes: 6mm–19mm

400% more contact area. Offers more torque and less damage to fasteners. Prevents wrench from slipping at higher torque levels.

Ergonomic comfortable grip. Composite handle. Soft textured insert for maximum grip. Extra torque 8650 chrome nickel alloy steel. Finished set to resist rust. Fold up 9 Keys .050"–3/16".

Chrome Flex Handle

Ergonomic comfortable grip. Composite handle. Soft textured insert for maximum grip. Extra torque 8650 chrome nickel alloy steel. Finished set to resist rust. Fold up 7 Keys 1.5mm–6mm.

Ball Peen Hammer Set

The Square Drive Air Ratchet is ideal for hard–to–reach areas. Lever Type Throttle Control. Triple (3) Planetary Gear Design. Lightweight and Compact.

Lap joint. Polished head; black oxide finish. Size 7" (177.8mm). Capacity 1/4"-5/8" (6.4mm-15.9mm).

Covers almost every car, pick-up, SUV and small engine. Capable of handling almost every two or three way bolt pull possible. For use on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys and gears. Lifetime warranty covering defects in workmanship or materials. Storage case and detailed application chart included.

Designed to service spark plugs on transverse mounted engines with close firewall clearance. May be used with or without an extension. Rubber insert grips the spark plug securely. Knurled for ease in handling. 6- point design. Available in 5/8" or 13/16" sizes.

Tamper Proof Torx® Driver Set Contains: T8-T27 in 1/4" Dr.; T30-T55 in 3/8" Dr.

Designed to service spark plugs on transverse mounted engines with close firewall clearance. May be used with or without an extension. Rubber insert grips the spark plug securely. Knurled for ease in handling. 6- point design. Available in 5/8" or 13/16" sizes.

Internal and external pliers. Tip kit includes four interchangeable color-coded tip sets; .039" diameter tip (black), 90° bend; .047" diameter tip (silver), straight and 45° bend; .070" tip diameter (gold), straight. Comfort grips and spring return handles.

Chrome, Standard Socket

Metric Long KS2 Combination Sets In Plastic Tray Contains: 10mm–18mm (except 11mm, 16mm) (not shown).

Chrome, Drive Extensions with an Overall length: 1" (25.4mm).

Chrome, Torx ®, Drivers

Housed in self-hinged unbreakable plastic case with removable tray.

The Chrome, 10 pc Socket Set Contains: 3/16"-9/16".

Impact Socket Sets In Metal Tray Contains Contains: 7/16"–1-1/8" and 1-1/4".

The Chrome, Fractional Socket Set, Contains: 3/8"–1-1/4".

Chrome–plated. Blasted tips. Comfort-Grip™ handles. Set Contains: 18" #1 Phillips.

One piece uni–cast construction. No exposed metal on handles or heads. Dead–blow striking action.

Standard Combination Wrenches offer more torque and less damage to fasteners and prevent the wrench from slipping with the KS2, Knuckle Saver System.

This Knurled Extension Set Contains: 2"-14".

Hex Head Driver Set Contains: 1/8"-3/8".

Metric Short Hex Driver Set In Metal Tray Contains: 4mm-10mm.

Chrome, Standard Socket

Designed to cut copper, aluminum, or thin wall steel tubing. Makes clean right angle cuts with no burrs or chips. The cutter has a nickel-chrome finish. Includes reamer blade and spare cutting wheel. Cuts tubing 1/8" to 1-1/8". Replacements:

Chrome, 1/2" Dr. 10" Ratchet.

Chrome, Standard Deep Sockets

2-1/8" x 3-1/2".

Starter Switch

Black plastic tray with clear plastic lid. (152.4 mm). 9-1/2" (241.3 mm).

Chrome, 3/8" Dr. 12" Extension.

The 5–pc Double End Flare Nut Wrench Set in Plastic Tray Contains: 1/4" x 5/16", 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16", and 3/4" x 13/16".

Slip–Joint Pliers Set In Plastic Tray

Standard Combination Wrenches offer more torque and less damage to fasteners and prevent the wrench from slipping with the KS2, Knuckle Saver System.

The Universal Socket Set contains sizes: 3/8"-3/4".

400% more contact area. Offers more torque and less damage to fasteners. Prevents wrench from slipping at higher torque levels.

Standard Combination Wrenches offer more torque and less damage to fasteners and prevent the wrench from slipping with the KS2, Knuckle Saver System.

Housed in self–hinged unbreakable plastic case with removable tray.

Neodymium-iron-boron extra high flux magnets. Telescopic Flex

Lady Foot Line–Up Bar Set In Plastic Tray Contains: LF12, LF16, LF21.

Chrome, Impact Set

New rubber retainer holds plug by the porcelain insulator for better grip. Knurl for firm control. Hex end allows turning by wrench. Chrome-plated.

Chrome, 3/8" Dr. 12" Locking Extension.

The Metric Impact Socket Set Contains: 10mm, 12mm–19mm, 21mm, 24mm.

Ergonomic comfortable grip. Composite handle. Soft textured insert for maximum grip. Extra torque 8650 chrome nickel alloy steel. Finished set to resist rust. Fold up Torx® 8 Keys T9–T40.

The most durable and powerful mechanism. Easily accessible patented forward–reverse regulator system and more power on reverse side.

Chrome–plated. Blasted tips. Comfort-Grip™ handles.. Set Contains:18" #2 Phillips.

Wobble Extension Set In Plastic Tray Contains: 1-1/4"-12".

Female square: 1/4". Male square: 1/4". Length: 1-3/8" (34.9mm).

The Metric Socket Set Contains: 5mm, 6mm–14mm.

Spinflex ® Ratchet Set offers a extra thin ratchet head, ergonomic handle, with a head that rotates 360° with one–hand direction change.

± 2% accuracy clockwise from 20% to 100% of full scale. Extra–large dial scale for excellent readability. Moveable scale always faces user. Memory needle indicates peak torque setting. Metal dial guard for added protection.

Designed for #22 to #10 AWG. Cuts and strips wire with a stripping gauge on the back. Electrical/mechanical crimp: terminal code red–blue 22–14, yellow 12–10. Equipped with a separate notch for crimping insulation grip. Bolt cutter. Stud gauge. Made of quality carbon tool steel. Cushioned handles (non–insulating).

Over 150 ft.-lbs. of lift. Stainless steel band with projection welds for strength and anti-corrosion. Heat-treated handle with increased metal thickness. Heat-treated handle/alloy steel swivel. Redesigned handle/swivel union for greater strength.

Contains sizes: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2". 21 Jobber length in straight shank. Eight knurled reduced sure-grip shanks for 3/8" chuck, 25/64" through 1/2".

Impact Adapter Set

Standard Combination Wrenches offer more torque and less damage to fasteners and prevent the wrench from slipping with the KS2, Knuckle Saver System.

Fatigue–free handling. Easy to operate. Long–lasting performance. Ideal for hole sawing, brake cylinder honing, and heavy–duty drilling, reaming, and wire bushing.

The 7–pc Standard Combination Wrench Set Contains: 3/8"–3/4".

Heavy-duty pistol grip 1/2" air wrench.

Pry Bar

Metric Impact Socket Set Contains: 10 metric standard impact socket sizes 10mm–19mm; 10 metric deep impact sockets sizes 10mm–19mm, OAL 2-3/4".

Standard Combination Wrenches offer more torque and less damage to fasteners and prevent the wrench from slipping with the KS2, Knuckle Saver System.

Chrome, Standard Deep Sockets

Plastic Boot

Drive Flex Handle with a Overall Length: 12-3/4" (323.9).

The Mighty Economy Set Contains: 8 standard sockets (3/8"-13/16"); 8 deep sockets (3/8"-13/16"); extension (3"); universal joint; and ratchet (7-1/2"). Plastic box (PB19XR) measures 8-5/8" x 7-1/8" x 1-7/8".

Chrome, Standard Deep Sockets

Metric Standard KS2 Combination Wrench Sets In Plastic Tray, contains: 7mm–15mm.

Standard Combination Wrenches offer more torque and less damage to fasteners and prevent the wrench from slipping with the KS2, Knuckle Saver System.

10 Screw ext ractors. 1/8" through 13/32". Multiple–spline construction. Blow–molded case.

VG4SP Swivel Pads.

The Metric Standard Socket Set In Metal Tray Contains: 6mm–19mm.

Precision-made, full-geared brass movement. Friction-free design. Bourbon tube movement. Also features: large 2" (50.8mm) dial; bleeder valve; and 14" (355.6mm) hose. Rubber “shock absorber” cover for protection. Two different ranges available:

The Combination Flare Nut Open End Wrench Set in Plastic Tray Contains: 5/16"–11/16".

Punch and Chisel Set With Gauge In Plastic Tray

Five popular Vise-Grip® sizes.

Chrome Adapter