Products

Alignment Tools

For removing inserts on the upper control arm alignment brackets when doing front-end alignments. Services 1989-current Chevrolet and GMC 1/2- 3/4- and 1-ton two and 4-wheel drive trucks. Also works on 1990 - current all-wheel drive Chevrolet Astro vans and GMC Safari vans. Self-centering knock-out for full punch removal with less tear.

Base SKU:7491C

In Stock: Yes

Price: $86.99 (USD)

Quantity:

AS1929

Services 1946 through current Chevrolet and GMC 5,200- and 7,200-lb. axles. 2-5/8" socket O.D. Removes and installs wheel bearing locknuts of Chevrolet-built truck axles. 3/4" drive, square opening.

Base SKU:AS1929

In Stock: Yes

Price: $58.99 (USD)

Quantity:

AS4542

Contains seven of the most wheel bearing locknut sockets for 4-wheel drive trucks. All sockets have 1/2" drive. Blow-molded case. Contains: • 55mm Socket Hex.
• 2-3/8" Socket Hex.
• 2-1/2" Socket Hex.
• 2-1/2" Rounded Hex.
• 2-3/4" Rounded Hex.
• 2-3/8" Rounded Hex.
• 2-9/16" Rounded Hex.

Base SKU:AS4542

In Stock: Yes

Price: $114.99 (USD)

Quantity:

AS785

Installs front seals and rear axle seals on Ford vehicles. The double-ended adapter installs both front and rear seals. A long 27-3/4" handle reaches beyond suspension components to make hammering easier. The adapter is bored to fit over the axle stub. Works on various Ford and Lincoln cars and SUV's from ‘81-current.

Base SKU:AS785

In Stock: Yes

Price: $89.99 (USD)

Quantity:

CC411

• For 22mm aftermarket replacement applications which are different than the 21mm original equipment
• Unique shape and double-ended 22mm socket allows easy access to hard-to-reach caster/camber adjusting bolts

Base SKU:CC411

In Stock: Yes

Price: $19.99 (USD)

Quantity:

FE6295

Includes five popular tools used for servicing Pitman arms, ball joints and tie rods on most vehicles. Contains: Pitman Arm Pullers.
Tie Rod Remover.
Tie Rod Remover/Pitman Arm Puller.
Ball Joint Aeparator.

Base SKU:FE6295

In Stock: No

Price: $249.99 (USD)

Quantity:

FWD2740

6-slot application on 1978 to 1989 3/4-ton Ford and 1973 to 1981 GM 3/4- and 1-ton. 4-slot applications are 1960 to 1989 GM 1/2-ton.

Base SKU:FWD2740

In Stock: Yes

Price: $35.99 (USD)

Quantity:

LT66BK

Drive-on rib grip tool kit for stud removal. Aligns and installs rib nuts. Rib Nut Sizes: 1-1/8" Budd wheel inner cap nut (13/16" head), 3/4" lug stud and 5/8" lug stud. For impact or hand drive use. Complete with instructions and metal storage case.

Base SKU:LT66BK

In Stock: Yes

Price: $124.99 (USD)

Quantity:

OT6006

Specially designed to accommodate the 1-11/16" (43mm) wheel bearing retaining nut which is recessed into the hub. Used to remove and install the front-wheel bearing retaining nut on 1994 and newer Dodge 1/2-ton pickup trucks with Dana 44 front axle and Dana 60 axle with a vacuum disconnect. It is 1/2" drive and can be used with an impact wrench.

Base SKU:OT6006

In Stock: No

Price: $67.99 (USD)

Quantity:

OT7503

Works on imports and domestics, front- or rear-wheel drives, and cast or stamped steel steering knuckles. Apply up to 5 tons of force.

Base SKU:OT7503

In Stock: Yes

Price: $126.99 (USD)

Quantity:

RLT2800

Small end fits Ford'86 and newer light trucks with Dana 44 front axle. Large end fits'85 and newer Ford F150-F350 trucks with Dana 80 full floating rear axle. Use with 1/2" extension in conjunction with torque wrench. Not for impact use.

Base SKU:RLT2800

In Stock: Yes

Price: $61.99 (USD)

Quantity:

RM32A

• High-quality rubber heads give non-marring hammer action
• Sturdy wood handles

Base SKU:RM32A

In Stock: Yes

Price: $20.79 (USD)

Quantity:

SC118

Designed for special 6-lug locknuts on GM 3/4-and 1-ton, 4-wheel drive front axles, 1973 to present. Ford 3/4-ton, 4-wheel drive front axles, 1978 to present. 1/2" square drive for accurate torquing. Black-oxide finish.

Base SKU:SC118

In Stock: Yes

Price: $74.99 (USD)

Quantity:

TR6275

Design that permits 360° rotation of the adjusting sleeve. Blow-molded storage case.

Base SKU:TR6275

In Stock: Yes

Price: $167.99 (USD)

Quantity:

TR7023

Permits 360° sleeve rotation. Four-position feature for locate tool for proper sleeve grip. Services older models of compact and standard cars and light trucks.

Base SKU:TR7023

In Stock: Yes

Price: $39.99 (USD)

Quantity: