You are here Product Details
 

 

Products

Front Wd & Suspension Tools


Page: 1 2  
ASTOVW524A
Repair and replace front shock absorber retaining nut. For use on 1985 and newer VW Golf, Jetta and Quantum; and 1984 and newer Audi 4000's. For hand-driven use only.
Base SKU:ASTOVW524A
In Stock: Yes
Price: $6.99 (USD)
Quantity:  
BJ031
A complete set of adapters and special large C-frame to remove and install ball joints on most Chrysler/Dodge light-duty trucks, 1999-2004 and Jeep Cherokee, Grand Cherokee, Wrangler and Liberty vehicles, 1997-2004. Large C-frame, 19 adapters, and replaceable forcing screw tip to allow the use of the adapters in the BJ530 kit to be used for other applications.
Base SKU:BJ031
In Stock: Yes
Price: $398.99 (USD)
Quantity:  
BJ530
Allows for the removal and installation of the press fit ball joint on many GM and Ford light-duty trucks, vans and SUV's.
Base SKU:BJ530
In Stock: No
Price: $399.99 (USD)
Quantity:  
BJ7025-7704
Used with the Mac Tools BJ7025MA ball joint press. Will also work with the OTC7249 ball joint press. Designed to work on 1967 to 1994 1/2-and 3/4-ton 4WD vehicles with Dana 44 front axles. Dana 44 front axles are found on Ford, GM, Dodge, IHC and Jeep 4WD vehicles.
Base SKU:BJ7025-7704
In Stock: Yes
Price: $127.99 (USD)
Quantity:  
BJ7025MA
• The ball joint press includes three receiver tubes to remove and install
• Sizes include:
3" OD x 2-3/4" ID; 2-1/2" OD x 2-1/4" ID; 2" OD x 1-3/4" ID
Base SKU:BJ7025MA
In Stock: Yes
Price: $199.99 (USD)
Quantity:  
CC622B
Features Acme threads on central rod. Central rod allows fast compression and single turning action. Tool fits inside spring to compress. Operates with wrench, hand or air ratchet.
Base SKU:CC622B
In Stock: Yes
Price: $51.99 (USD)
Quantity:  
CV98212
Removes the circlip with ease after CV boot has been removed.
Base SKU:CV98212
In Stock: Yes
Price: $42.99 (USD)
Quantity:  
CVB3050
Designed for use on earless-type clamps, including those found on late model GM inboard CV joints.
Base SKU:CVB3050
In Stock: Yes
Price: $24.99 (USD)
Quantity:  
CVB3080
For all ear-type clamps, including late model GM front wheel outboard CV joints. May be used with 1/2" torque wrench and breaker bar to crimp late model GM outboard CV boot clamps to specification.
Base SKU:CVB3080
In Stock: Yes
Price: $36.99 (USD)
Quantity:  
CVB3095
Used to install the “band-it” style clamps on CV boots and rack and pinion boots. Can be used with torque wrench. Handle is heat-treated spring steel and black-oxide finish.
Base SKU:CVB3095
In Stock: Yes
Price: $14.99 (USD)
Quantity:  
FHI7135MA
Installs front hubs on Escort, Lynx, Tempo, Topaz and Sable. Fits any hub with a 20mm to 22mm hub thread. Includes 20mm and 22mm forcing screws, washer and nut, forcing cylinder and rugged blow-molded storage case.
Base SKU:FHI7135MA
In Stock: Yes
Price: $72.99 (USD)
Quantity:  
GST6275
Removes MacPherson strut cartridges on GM10 cars. Includes 1988 and new Grand Prix, Buick Regal, Chevrolet Lumina and Cutlass Supreme.
Base SKU:GST6275
In Stock: Yes
Price: $69.99 (USD)
Quantity:  
LPR7122R
Removes tie rod inner socket retaining pin on Ford vehicles with rack and pinion power steering. Replacement tips available separately.
Base SKU:LPR7122R
In Stock: Yes
Price: $70.99 (USD)
Quantity:  
MHT491
Works on virtually all floating and trapped rotors found on domestic and import vehicles. Fits behind the rotor. Pushes on the steering knuckle, not the rotor. Eliminates the need to remove the knuckle assembly. No need for a shop press or unnecessary front end alignments. New Ford adapter included for use on Taurus/Sable 1986-1995 and Contour/Mystique 1995-newer vehicles! Puller and adapter improved with addition of a beveled edge for easier use in tight fit applications.
Revised Adapter.
Base SKU:MHT491
In Stock: Yes
Price: $524.99 (USD)
Quantity:  
MHT6290
Services 1988-2000 GM 1/2-, 3/4- and 1-ton trucks Tahoe, Suburban and Yukon; 1994-2000 Dodge 1/2-, 3/4- and 1-ton Ram trucks; 1997-2000 Ford 1/2-ton trucks, and Expeditions; 1998-2000 Ford 3/4- and 1-ton trucks and Excursions; 1985-2001 Jeep Cherokee.
Base SKU:MHT6290
In Stock: Yes
Price: $167.99 (USD)
Quantity:  
MS7560
Fits a wide range of struts and no special adapter shoes are needed. Tool compresses springs of 4" to 9" O.D. with wire diameters of 7/16" to 11/16". It can be driven by an impact wrench.
Base SKU:MS7560
In Stock: Yes
Price: $356.99 (USD)
Quantity:  
OT7085
Works on all vehicles with band-type boot clamps.
Base SKU:OT7085
In Stock: Yes
Price: $48.99 (USD)
Quantity:  
OT7135A
Ensures proper installation of spline halfshafts that are interference fit into the front hub on Escort/Lynx, Tempo/Topaz and Taurus/Sable cars.
Base SKU:OT7135A
In Stock: Yes
Price: $84.99 (USD)
Quantity:  
OT7568A
Services 1988 to current Pontiac Grand Prix, Buick Regal, Oldsmobile Cutlass Supreme and Chevrolet Lumina Sedan. For removing and installing either gas-charged or oil-filled strut cartridges.
Base SKU:OT7568A
In Stock: Yes
Price: $195.99 (USD)
Quantity:  
OT7588A
Pulls multi-slot and OE bushings on Ford 4WD vehicles. Removes rusted and seized bushings before resetting the caster/camber. Works on any angle OE bushing. Applications (OE) 1980 to current 4WD F and E series (full-size pickups and vans), and full-size Broncos; 1983 to 1989 4WD Ranger and Bronco II.
Base SKU:OT7588A
In Stock: No
Price: $142.99 (USD)
Quantity:  
Page: 1 2  
Privacy StatementTerms Of UseCopyright 2006-2009 Mac Tools. All Rights Reserved.