Mac Tools -> Products -> Diagnostics & Testing -> Digital Multimeters

Products

Digital Multimeters

• Same specifications as the EM710 plus: Capacitance and non-automotive frequency measurement
• Back-light and RS-232C+USB
• Test all capacitors, from 0.001µF to 999µF.
• RS-232C/USB enables the meter to interface with a DOS or Windows^® computer by using its bi-directional RS-232C/USB serial interface cable and its DOS or Windows^® software supplied with this meter

Base SKU:EM720A

In Stock: Yes

Price: $279.99 (USD)

Quantity:

EM100

Enables the user to measure surface, air or liquid temperatures when use with a type “K” thermocouple and most digital multimeters having standard input jack spacing of 2/4" and 10 mega ohms or greater input impedance. Either the Fahrenheit ( F) or the Celsius ( C) scale can be selected. -40º F to 1,832º F (-40º C to 1,000º C). See comparison chart on opposite page.

Base SKU:EM100

In Stock: Yes

Price: $99.99 (USD)

Quantity:

EM110

Range and resolution capable of displaying 1mV output per amp of measured current (400A range) and 0.1mV output per amp of measured current (1000A range). 1000A AC/DC current measurements capability. Maximum conductor size: 1 ea ø51mm (2.0").

Base SKU:EM110

In Stock: Yes

Price: $189.99 (USD)

Quantity:

EM400

This Meter measures the average-responding Alternating Current from 0.3A to 1000A. AC measurements are from 40Hz to 400Hz. It is rugged, single-handed operational, and has a protective hand guard to prevent accidental contact with conductors.
Features:
• Manual range for amperes/volts and Auto-ranging frequency
• Peak hold function
• Low-battery indicator
• AC/DC toggle switch
• 600V input protection on Ohm range
• Continuity beeper
• Protective soft carrying case

Base SKU:EM400

In Stock: Yes

Price: $279.99 (USD)

Quantity:

EM410

This Meter measures the true-rms value of Alternating Current (AC) over from 0.3A to 700A. AC measurements are from 10Hz to 1KHz and frequency measurements are from 0.5Hz to 10KHz. It can also measure frequency while measuring current flow simultaneously. AC and DC voltages and resistances can be measured and also continuity check is possible with this meter. Features:
• Auto range or Manual range selection.
• Hold function to freeze readings.
• 41 segment analog bar graph.
• Low battery indicator.
• Automatic power off.
• SOFT Mode to display a 3-second running average.
• CREST Mode that measures half-cycle peak AC amperes.
• MIN/MAX record.

Base SKU:EM410

In Stock: Yes

Price: $379.99 (USD)

Quantity:

EM600

3-3/4" digital -4,000 count digital display with 41 segment bar graph. Standby mode. Fast continuity beeper, diode test. Data hold. 0.9% basic DC volts accuracy. 1.9% basic AC volts accuracy. Surge (Transient) voltage protection. 0.75% basic ohms accuracy. Capacitance-0.001 to 9,999µF. Frequency: 1 Hz to 200kHz Max/Min recording function. CE-mark certified.

Base SKU:EM600

In Stock: Yes

Price: $149.99 (USD)

Quantity:

EM700

Autoranging. Safety shutter protection for current terminals. Surge (transient) voltage protection. Fused 10 amps range. True-RMS on AC voltage and current ranges. Standby mode indicator. Fix Hold™ (automatic reading hold). Capacitance measurement (autoranging, 0.001µF to 999µF). Continuity beeper and diode test. Protection on Ohm range and continuity and diode test. CE-mark certified.

Base SKU:EM700

In Stock: Yes

Price: $179.99 (USD)

Quantity:

EM710

Accurate automotive electronics test and advanced measurements with 20,000 count on the high resolution 4,000 count display.
• Direct reading of DWELL when testing electronic fuel injection
• RPM measurement for automotive engines with 1 to 12 cylinders using the test leads of the inductive pick-ups
• Surge voltage protection
• Meets UL 1244, UI201, IEC1010-1, and EMC directive standards

Base SKU:EM710

In Stock: Yes

Price: $259.99 (USD)

Quantity:

EM921

Features unit signal indication (max 3,999 counts), auto power-off, low battery indication, frequency/duty-cycle measurement and auto polarity changing. Full range protection, diode and continuity test. AC frequency response: 50-400Hz.

Base SKU:EM921

In Stock: Yes

Price: $39.99 (USD)

Quantity:

EMC600

• All 0 to 600-volt AC/DC powered circuits.
• CE approved, measures voltages, resistance, continuity.
• Peak reading hold (Important feature when testing alternators or batteries).
• Overload indicator when input is higher than 600V.
• Clamp opens up to 1" (25.4mm).

Base SKU:EMC600

In Stock: Yes

Price: $239.99 (USD)

Quantity: